温熙宇

个人简介

主要的研究集中在从1000到7000系列铝合金的物理冶金和性能研究及应用。给铝工业从熔炼，铸造，热轧，退火冷轧到最终产品包括涂漆和涂层的技术支持。为生产连铸铝合金板材用Pro-cast, ABAQUS和Themo-CALC 软件进行连续铸造，热轧和冷轧模拟。在2004年完成美国能源部研究项目(用双履带连铸机生产连铸铝合金板材在线退火研究)，大量该板材的应用到汽车工业，成型和结构铝材。具有大量的铝合金和金属板的失效分析经验。在国内外知名杂志上发表论文和会议论文80多篇。是国际知名的美国材料金属矿物协会（TMS）会员，轻金属分会委员，应邀在国际会议上作十几次报告并多次主持的分组会议，参编Light Metals （2017 & 2018），发表国际会议文集发表论文十多篇。

教育背景

1983年，吉林大学，物理学，学士

1989年，燕山大学，材料科学，硕士

2000年，香港理工大学，制造工程学，博士

工作履历

1983 – 1986：东北重型机械学院，职称：助教，讲师

1989 – 1996：燕山大学，职称：副教授

1999 – 2002：肯塔基大学，工程学院，职称：博士后

2002 – 2026：肯塔基大学，工程学院，职称：高级研究员

2026 至今：福建福耀科技大学，新材料与新能源学院，特聘研究员

奖励荣誉

1．1994年机械电子工业部，“优秀青年教师”，一等奖

2．1995年机械工业部，“科技进步”，二等奖，《超硬磨料涂敷技术和设备》

3．1997年国家教育委员会，“科技进步”，三等奖，《超硬磨料和金属结合界面研究》

科研项目

1. 美国能源部在研项目（2023-2025）：大型空腔挤压件模拟和质量控制

2. 美国能源部项目一项（2000-2003）：在线退火连铸铝板应用于汽车工业

3. 香港研究基金委员会支助项目（1996-1999）：复杂应力下板金属变形的细观塑性分析

学术成果

论文集合作编辑

Light Metals 2018，Co-editor，The Minerals, Metals & Materials Society (TMS)， Phoenix, Arizona, USA

发表论文

1.    Xiaobing Tang, Xiyu Wen and Fuqian Yang, “Ultra-stable blue-emitting lead-free double perovskite Cs2SnCl6 nanocrystals enabled by an aqueous synthesis on a microfluidic platform”, Nanoscale, This journal is © The Royal Society of Chemistry, Vol 14, PP17641–17653 (2022)

2.    Xiaobing Tang, Yulin Zhang, Nadeesha Lakmali Kothalawala, Xiyu Wen, Doo Young Kim, Fuqian Yang, “MAPbBr3 nanocrystals from aqueous solution for poly (methyl methacrylate)-MAPbBr3 nanocrystal films with compression-resistant photoluminescence”, Nanotechnology, Vol. 33, No. 23, PP235605 (2022)

3.    X. Y. Wen, “Micro and Mechanical Characteristic of Hotband Annealed of a Continuous Cast Al–1.5Cu Alloy with Potential Application in High Strength and Low Cost Auto Forming Parts or Sheets”, Light Metals, Anaheim, CA, USA, Feb. 27-Mar 3, 212-220 (2022)

4.    Dai Zuo, Taotao Li, Wei Liang, Xiyu Wen, Fuqian Yang, “Microstructures and mechanical behavior of magnesium processed by ECAP at ice-water temperature”, Journal of Physics D: Applied Physics, Vol 51m No. 18 PP185302 (2018)

5.    Diaoyu Zhou, Wenwen Du, Xiyu Wen, Junwei Qiao, Wei Liang, Fuqian Yang, “Local deformation and texture of cold-rolled AA6061 aluminum alloy”, Journal Materials, 11 Vol, No. 10, PP1866 (2018)

6.    Diaoyu Zhou, Dai Zuo, Xiyu Wen, Wei Liang and Fuqian Yang, “Through-thickness texture gradient and microhardness of cold-rolled AA6061”, Materials Research Express, 5, No.6, 066521 (2018)

7.    *X. Y. Wen, Y. Liu, L. R. Tong, Q. Zeng, T. Zhai, Z. Li, “Effect of iron content on recrystallization texture evolution and microstructures of the cold rolling continuous cast AA5052 alloy sheet”, Metallurgical and Materials Transactions A, 47A, 1865-1880 (2016)

8.    *X. Y. Wen, W. Wen, Y. Liu, Z. D. Long, S. Ningileri, T. Zhai and Z. Li, “Textures and microstructures of AA3xxx hotbands from two different continuous casting processes”, Materials Science and Technology, 31,1495-1500 (2015)

9.    *W. Guo, J. Guo, J. Wang, M. Yang, H. Li, X. Y. Wen, J. W. Zhang, Materials Science and Engineering A, 634, 167-175 (2015)

10.  Yuan Sun, Guangfeng Zhao, Xiyu Wen, Junwei Qiao, Fuqian Yang, “Nanoindentation deformation of a bi-phase AlCrCuFeNi2 alloy”, Journal of Alloys and Compounds, 608, 49-53 (2014)

11.  *W. Guo, M. Yang, Y. Zheng, X. S. Zhang, H. Li, X. Y. Wen and J. W. Zhang, “Influence of elastic tensile stress on aging process in an Al-Zn-Mg-Cu alloy”, Materials Letters, 106, 14-17 (2013).

12.  *Q. Zeng, X. Y. Wen, and T. Zhai, “A study of recrystallisation textures in hot band of a continuous cast Al-Mn-Mg alloy”, Materials Science and Technology, 26, 914-919 (2010).

13.  *Q. Zeng, X. Y. Wen, and T. Zhai, “Effect of Precipitates on the Development of P Orientation {011}566 in a Recrystallized Continuous Cast AA 3004 Aluminum Alloy after Cold Rolling”, Metallurgical and Materials Transactions A, 40, 2488-2497 (2009)

14.  S. K. Das, W. M. Yin, X. Y. Wen, Y. Liu, S. Ningileri, Formability Evaluation of Recycle-Friendly Automotive Aluminum Alloys, SAE International Journal of Materials and Manufacturing, 1(1): 503-510 (2008)

15.  *Q. Zeng, X. Y. Wen and T. Zhai, “Texture evolution rate in continuous cast AA5052 aluminum alloy during single pass hot rolling”, Materials Science and Engineering A, 476, 290-300 (2008).

16.  *X. Y. Wen, Z.D. Long, W.M. Yin, T. Zhai, Z. Li and S.K. Das, “Texture evolution in continuous casting aluminum alloy AA5052 hot band during biaxial stretching”, Materials Science and Engineering A, 454-455, 245-251 (2007).

17.  *J. X. Li, X. Y. Wen, C.-S. Man and T. Zhai, “Fatigue of continuous cast AA5754 Al alloy sheet”, Materials Science and Technology, 23, No. 3, 324-332 (2007).

18.  *J. Li, Q. Zeng, X. Y. Wen, T. Zhai, “Microstructure, texture and mechanical properties of continuous cast AA 5083 aluminium alloy”, Materials Science and Technology ,23 No. 2, 225-229 (2007).

19.  *W. B. Lee and X. Y. Wen, “A dislocation-based model of forming limit prediction in the biaxial stretching of sheet metals”, International Journal of Mechanical Science, 48, 134-144 (2006).

20.  *X. Y. Wen, T. Zhai, C. H. Xiao, S. Ningileri, Z. Li, W. B. Lee and S. Das, “A dislocation-model of forming limit diagrams of FCC metal sheet with combination of cube and copper orientations”, Materials Science and Engineering A, 402, 149-157 (2005).

21.  *X. F. Yu, Y. M. Zhao, X.Y. Wen, T. Zhai, “A study of mechanical isotropy of continuous cast and direct chill cast AA5182 Al alloys”, Mater. Sci Eng. A, 394, 376-384 (2005).

22.  *X. F. Yu; T. Zhai, X. M. Cheng, X. Y. Wen, J. T. Liu, W. C. Liu, J. Chen and J. G. Morris, “Microstructure evolution and mechanical anisotropy of strip cast and direct chill cast AA5182 aluminum alloy”, Materials Science Forum (Switzerland), vol. 396-402, Part 1, pp. 101-106 (2002).

23.  X. Y. Wen and W. B. Lee, "Textures of Sheet in AA3003 Aluminum Alloy under Biaxial Stretching", Textures and Microstructures (USA), Vol.34, No.4, December, pp217-225 (2000)

24.  *W. B. Lee and X. Y. Wen, “A Dislocation-Model of Limit Strain Prediction in Aluminum Sheet Metals under Biaxial Deformation”, International Journal of Damage Mechanics, Vol.9, No.3, July, pp286-301 (2000).

25.  *X. Y. Wen and W. B. Lee, “Orientation Hardening and Instability of an AA3003 Aluminium Alloy Sheet under In-plane Strain Stretching”, Scripta Materialia, Vol.43, No. 1, June, pp1-7 (2000).

26.  *X. Y. Wen and W. B. Lee, “Evolution of Orientation Hardening in the Cold Rolling of an AA3003 Aluminium Alloy Sheet”, Key Engineering Materials, vol.145-149, pp1161-1166 (1998).

会议论文

1.    Xiyu Wen, Yan Jin, and Wei Li, “Mechanical Properties, Microstructures, and Textures of Cold Rolling Sheets Made from a Low-cost Continuous Cast Al-1.5Cu Alloy with Potential Application in Auto Sheets” Light Metal Proceedings, pp262-270, TMS annual meeting 2023, March 19-23, San Diego, CA, USA

2.    Xiyu Wen, “Micro and Mechanical Characteristic of Hotband Annealed of a Continuous Cast Al–1.5Cu Alloy with Potential Application in High Strength and Low Cost Auto Forming Parts or Sheets”, Light Metal Proceedings, pp212-220, TMS annual meeting 2022, Feb. 27–Mar. 3, Anaheim, CA, USA

3.    Xiyu Wen, Randall Bowers, and Shridas Ningileri, “On Microstructures, Textures and Formability of AA6xxx Alloy Sheets from DC and CC Processing”, Light Metal Proceedings, pp429-434, TMS annual meeting 2019, March 10-14, San Antonio, Texas, USA